top of page

Which Properties Qualify for a Reverse Mortgage Home Types and Requirements

Writer: Carlo Sanchez
Carlo Sanchez
Nov 1
9 min read

A reverse mortgage is tied to the home, so the property matters just as much as the borrower. Age, equity, and financial readiness are part of the approval process, but the home itself must also fit the program’s rules.


In the United States, most reverse mortgages are Home Equity Conversion Mortgages, often called HECMs, which are insured by the Federal Housing Administration. Other private or proprietary reverse mortgages may have different rules, but HECM guidelines set the standard many borrowers hear about first.


This article is for general information only and is not financial, legal, or tax advice. Reverse mortgage rules can change, and lenders may add their own requirements, so a qualified lender or HUD-approved housing counselor should review the details of a specific property.


Wide-angle view of a single-story home with a front walkway
A primary residence is the starting point for most reverse mortgage reviews.

The basic property rule is simple


For a reverse mortgage, the property generally must be the borrower’s primary residence. That means the borrower lives there for most of the year and treats it as home.


A vacation home, seasonal cabin, or investment property usually does not qualify for a HECM. The program is designed to help older homeowners access equity in the home they occupy, not to finance rental portfolios or second homes.


Most eligible properties also need to meet these broad standards:


  • The borrower must have legal ownership or a qualifying ownership interest.

  • The home must meet FHA property standards.

  • The property must be safe, livable, and in reasonable repair.

  • Existing liens, such as a traditional mortgage, must be paid off at closing or with reverse mortgage proceeds.

  • Property taxes, homeowners insurance, and any required association dues must stay current after closing.


Some homes need repairs before approval. In some cases, a lender may allow certain required repairs to be completed after closing through a repair set-aside. That is not automatic, and major safety or structural issues can block approval until fixed.


Single-family homes are the most common fit


Single-family homes are often the clearest match for a reverse mortgage. A detached house, townhouse, or similar one-unit residence may qualify if it is the borrower’s primary residence and meets FHA standards.


The property does not need to be luxurious or newly renovated. It does need to be suitable collateral for the loan and safe for occupancy.


Requirements for single-family homes


A single-family home usually needs to meet these conditions:


  • The borrower occupies the home as a primary residence.

  • The home is legally considered residential real estate.

  • The property meets FHA minimum property standards.

  • The title is clear enough for the lender to insure the reverse mortgage.

  • The home has adequate access, utilities, and basic systems.


FHA standards look at the condition of key parts of the property, including the roof, foundation, electrical system, plumbing, heating, water supply, and structural safety.


A peeling paint issue, broken handrail, roof leak, unsafe steps, or nonworking heating system may need attention. Cosmetic issues, such as dated cabinets or worn carpet, usually matter less unless they create a safety or habitability concern.


Properties with extra land or special features


Some single-family homes include acreage, barns, workshops, guest structures, or mixed-use elements. These homes can be more complex.


A property with extra land may still qualify if it is common for the area and mainly residential. A small home-based business may not automatically disqualify the property, but the residence must remain the primary use. If the property looks more like a farm, commercial facility, or income-producing business site than a regular home, the lender may need a closer review.


Accessory dwelling units, such as an in-law suite or backyard cottage, can also raise questions. The key issues are local zoning, legal use, appraisal treatment, and whether the property still fits within eligible residential property guidelines.


Multi-family homes can qualify up to four units


A multi-family property may qualify for a reverse mortgage if it has two to four units and the borrower lives in one of them as a primary residence.


This is an important option for homeowners who live in a duplex, triplex, or fourplex. The borrower does not need to occupy every unit. Renting the other units may be allowed, as long as the owner lives in one unit and the property meets program rules.


A building with five or more units is generally treated as commercial or apartment property for this purpose and does not qualify for a HECM.


Requirements for two-to-four-unit homes


A qualifying multi-family home generally must meet these conditions:


  • The property has no more than four residential units.

  • The borrower occupies one unit as a primary residence.

  • The entire property meets FHA property standards.

  • The property is legally permitted as a two-to-four-unit residential building.

  • Separate units have safe access and basic livability.


The appraisal will review the property as a whole, not only the owner’s unit. That means a serious issue in a rented unit, common stairwell, shared roof, or basement may affect eligibility.


For example, a borrower living in one side of a duplex may have a clean, well-maintained unit. If the other unit has unsafe wiring or a nonworking heating system, the lender may require repairs before approval.


Rental income does not replace occupancy


Rental income from other units may help with a homeowner’s overall financial picture, but it does not change the main occupancy rule. The borrower must live in one of the units.


A duplex used only as a rental property would not qualify for a HECM reverse mortgage. A fourplex where the owner lives in one unit and rents the other three may qualify if all other conditions are met.


Eye-level view of a small duplex with two front doors and shared landscaping
Two-to-four-unit homes may qualify when the borrower lives in one unit.

Condominiums need project approval or lender review


Condos can qualify for a reverse mortgage, but they often require more documentation than a detached single-family home.


With a condo, the borrower owns an individual unit and shares ownership or responsibility for common areas through a homeowners association. Because of that shared structure, the lender must look at both the unit and the condominium project.


For HECM loans, the condo generally must meet FHA condominium rules. In some cases, a unit may be considered through FHA’s single-unit approval process if the full condo project is not already FHA-approved. Not every lender offers every approval path, so this should be checked early.


What lenders look for with condos


A condo review may include:


  • FHA approval status of the condo project.

  • Homeowners association budget and insurance.

  • Owner occupancy levels within the project.

  • Delinquent association dues.

  • Any major litigation involving the association.

  • Restrictions in the condo documents.

  • Condition of common areas and shared systems.


The unit itself must also meet property standards. A condo with a damaged roof, failing shared plumbing, unsafe balconies, or major insurance problems may run into approval issues, even if the borrower’s individual unit looks fine.


Why association health matters


A reverse mortgage lender wants to know that the condo project is financially and physically stable. If many owners are behind on dues, the reserve funds are weak, or the association lacks proper insurance, the property may be considered a higher risk.


This can surprise condo owners because they may think only their unit matters. With a condo, the whole project affects eligibility.


For that reason, a condo owner should gather association documents early. These may include the budget, master insurance policy, bylaws, recent financial statements, and proof of FHA approval if available.


Co-ops are more limited


Cooperative housing, usually called a co-op, works differently from a condo. In a co-op, residents typically own shares in a corporation that owns the building, along with a proprietary lease giving them the right to occupy a unit.


That ownership structure creates a challenge for HECM reverse mortgages. FHA-insured HECMs generally do not accept co-op units in the same way they accept eligible single-family homes, two-to-four-unit homes, approved condos, and manufactured homes.


Some private reverse mortgage programs may consider certain co-op properties, especially in markets where co-ops are common. These products are not the same as HECMs, and their rules can vary widely by lender, state, property value, and co-op board requirements.


Conditions that may affect co-op options


When a lender does consider a co-op for a private reverse mortgage, it may review:


  • The co-op corporation’s financial strength.

  • Building insurance and maintenance reserves.

  • Board approval requirements.

  • Occupancy rules.

  • Existing liens or underlying building debt.

  • State and local laws affecting co-op financing.


Co-op owners should ask early whether the loan being discussed is a HECM or a proprietary reverse mortgage. That one distinction can change the answer.


Manufactured homes can qualify if they meet strict standards


Manufactured homes may qualify for a reverse mortgage, but the rules are more specific than many homeowners expect.


For FHA purposes, a manufactured home is built to the federal HUD Code, which applies to manufactured homes built on or after June 15, 1976. Older mobile homes built before that date generally do not qualify for FHA-insured reverse mortgages.


The home also needs to be real property, not merely personal property. That usually means it is permanently attached to an approved foundation and tied to land in a way that meets FHA and state requirements.


Common manufactured home requirements


A manufactured home generally must meet these conditions:


  • Built on or after June 15, 1976.

  • Built to HUD Code standards.

  • Has HUD certification labels and a data plate, or acceptable verification.

  • Permanently attached to an FHA-compliant foundation.

  • Classified and taxed as real estate where required.

  • Meets minimum size and livability standards.

  • Located on land the borrower owns or otherwise qualifies under program rules.

  • Has not been moved from a prior installed location in a way that violates FHA rules.


The foundation requirement is often the biggest issue. The home must be anchored and supported correctly, not simply sitting on blocks or temporary supports. A foundation inspection by a qualified professional may be required.


Land ownership and title matter


Manufactured homes can have title issues if the home and land were not legally joined as real estate. In some states, a manufactured home starts with a vehicle-style title. To qualify for certain mortgage financing, that title may need to be retired, surrendered, or converted according to state law.


A manufactured home in a rented lot or land-lease community is harder to qualify under HECM rules. Some situations may not qualify at all. The lender will need to review the land arrangement, lease terms if any, title status, and foundation documentation.


Close-up view of a manufactured home foundation with secure skirting and steps
Manufactured homes often need extra documentation for the foundation and title.

Quick comparison of eligible property types


Property type

Can it qualify for a HECM reverse mortgage

Key conditions

Single-family home

Yes, commonly

Must be the borrower’s primary residence and meet FHA property standards

Two-to-four-unit home

Yes

Borrower must live in one unit, and the full property must qualify

Condo

Yes, if eligible

Condo project or unit must meet FHA condo requirements

Co-op

Usually not for HECM

May be possible only through some private reverse mortgage programs

Manufactured home

Yes, if strict rules are met

Must meet HUD Code, foundation, title, age, and real property requirements

Second home

No for HECM

HECM requires primary residence occupancy

Investment-only property

No for HECM

Borrower must live in the property

Five-or-more-unit building

Generally no

Usually treated as commercial or apartment property


Conditions that apply to nearly every property


Even when the property type is eligible, the home still has to pass a broader review. A reverse mortgage is not approved on property type alone.


The home must be safe and livable


The appraiser will look for conditions that affect health, safety, and structural soundness. Common issues include:


  • Roof leaks or severe roof wear.

  • Exposed wiring or unsafe electrical systems.

  • Missing handrails where required.

  • Broken stairs or unsafe decks.

  • Plumbing leaks or lack of working water.

  • Heating problems.

  • Foundation damage.

  • Pest or moisture damage.


Some repairs are minor. Others can delay or stop the loan. The lender will explain which repairs are required and whether they must be completed before closing.


Taxes, insurance, and dues must be current


A reverse mortgage borrower keeps ownership of the home. That also means keeping up with ongoing property obligations.


These usually include:


  • Property taxes.

  • Homeowners insurance.

  • Flood insurance if required.

  • Condo or homeowners association dues.

  • Basic maintenance.


Failing to pay these obligations can create a default under the reverse mortgage terms. Lenders also review whether the borrower appears able and willing to keep paying these costs after closing.


The home must meet occupancy rules


The borrower must continue to live in the home as a primary residence. Absences for travel, family visits, or medical care may be allowed within program rules, but the property cannot become a long-term rental or vacant home while the reverse mortgage remains in place.


How to check whether a property may qualify


A homeowner can save time by checking the property basics before applying.


Start with these steps:


  1. Confirm the property type


    Identify whether the home is a single-family residence, two-to-four-unit property, condo, co-op, or manufactured home.


  1. Check primary residence status


    The home should match the borrower’s driver’s license, tax records, voter registration, or other documents that show primary occupancy.


  1. Review current liens


    Gather mortgage statements, home equity line statements, tax liens, or other recorded debts tied to the property.


  1. Look for repair concerns


    Walk through the home and note safety or habitability issues. Roof, heating, electrical, plumbing, stairs, and foundation problems matter most.


  1. Collect property documents


    Condo owners should gather association documents. Manufactured home owners should look for HUD labels, title paperwork, foundation records, and land documents.


  1. Speak with a knowledgeable lender or counselor


    A HUD-approved reverse mortgage counselor can explain broad program rules. A lender can review property-specific eligibility.


The main takeaway


Many common home types can qualify for a reverse mortgage, including single-family homes, two-to-four-unit properties, certain condos, and some manufactured homes. The home must usually be the borrower’s primary residence, meet FHA property standards, and satisfy title, insurance, and occupancy rules.


Co-ops are the main exception under HECM rules, though some private reverse mortgage options may exist. Manufactured homes and condos can qualify, but they often need extra documentation and closer review.


The best next step is to identify the property type, gather the key documents, and ask direct questions before moving too far into the application process. A reverse mortgage can be a useful option for the right home and the right situation, but eligibility starts with the property itself.


Comments


A reverse mortgage, available to homeowners age 62 or over (and younger in some cases), is a loan based primarily on the homeowner’s current equity in the their principal residence.  Funds from a reverse mortgage may be disbursed in one lump sum, or over regularly scheduled intervals. As long as the borrower occupies the property as their principal residence, no principal and interest payments are required. The loan balance of principal and accrued interest on the reverse mortgage will be due and payable upon (i) sale of the property or (ii) when it no longer is the borrower’s primary residence (each a “Maturity Event”). Although no payments of principal and interest are required on a reverse mortgage until a Maturity Event occurs, the borrower is responsible for (i) maintenance of the property,  (ii) timely payment of all taxes, assessments and fees (such as HOA fees) related to the property, and (iii) insuring the property against hazards, including fire, windstorm and other applicable hazards related to specific properties such as flood and earthquake insurance. Homeowners must complete counseling with a government certified counselor before applying for a reverse mortgage.  Homeowners also should consult a tax professional for potential tax consequences. HUD or FHA did not distribute or approve this material.  A reverse mortgage is subject to underwriting approval and rates and terms are subject to change and to borrower qualification. SecurityNational Mortgage Company is an Equal Housing Lender NMLS 3116.

© 2023 by Carlo Sanchez. Powered and secured by Wix

bottom of page